|
The Sangoma A102 Card: two ports of optimized voice and data over T1, E1, and JI available with Telco-grade hardware echo cancellation. Part of Sangoma's award-winning Advanced Flexible Telecommunications product line, the A102 uses the same high-performance PCI or PCI Express interface that providing superior performance in critical systems all over the world. The A102 supports up to 60 voice calls or 4.096 Mbps of full-duplex data throughput over two T1, E1, or J1 lines. Take advantage of hardware and software improvements, as soon as they become available. Like all cards in Sangoma's AFT family, the A102 is field upgradable with crash-proof firmware. Choose the Sangoma A102D and A102DE cards with Octasic®'s DSPecho cancellation and Voice Quality Enhancement functions on your open source or even proprietary telephone system. hardware and certified algorithms to achieve carrier-grade Operating systems - Windows® 2003, Windows® XP, Windows® Server 2008, Windows® Vista.
- Linux (all versions, releases and distributions from 1.0 up).
- FreeBSD.
Voice applications Asterisk™, Yate™, Open PBX/IVR, FreeSWITCH™, TrixBox™, as well as proprietary applications. Line protocols - FCC Part 15 Class A, FCC Part 68, CISPR 22, EN 55022, Class A, CIPSR 24, AFIC-2016, IEC 60950.
- Technical certifications in Russia, Malaysia, and Australia.
Higher level protocols IP/PX over Frame Relay/PPP/HDLC/X.25, X.25 over Frame Relay (Annex G), BSC over X.25 (D.T. and TOP), SNA over X.25, PPPoE, PPPoA, IP over ATM. Diagnostic tools WANPIPEMON, SNMP, System logs T1/E1 Status alarm - RED: Telco Red Alarm Condition.
- OOF: Out of Frame.
- LOS: Receive Loss of Signal.
- AIS: Alarm Indication Signal.
- RAI: Remote Alarm Indication (Yellow Alarm).
RJ 45 E1/T1 Pinouts | Pin | Signal | Pin | Signal | | 1 | RRING | 4 | TRING | | 2 | RTIP | 5 | TTIP | Certification - FCC Part 15 Class A, FCC Part 68, CISPR 22, EN 55022 Class A, CIPSR 24, AFIC-S016, IEC 60950.
Production quality ISO 9002 AFT card (PCI) | Version | Interface | Digital Signal Processor | | A102 | PCI | N/A | | A102D | PCI | Hardware echo canceller | | A102E | PCI Express | N/A | | A102DE | PCI Express | Hardware echo canceller | Product Identifier A102DE PCI Express disassembled A102 PCI Technical specifications - Two T1/E1 ports with a single PCI or PCI-Express interface optimized for high performance voice and data applications.
- Mix T1 channel banks and E1 networks with full channel synchronization. TDM clocking mode lets network timing to be passed from a network-connected DS0 to any or all of the other ports, so both T1 and E1 are supported simultaneously.
- Support for Asterisk®, Yate™, CallWeaver™ and FreeSWITCH™PBX/IVR Projects, as well as other open source and proprietary PBX, Switch, IVR, or VoIP gateway applications.
- All of Sangoma’s AFT products use the same base PCI interface card. Fully compatible with all commercially available motherboards - proper PCI-standard interrupt sharing without manual tuning.
- Dimensions: 2U Form factor: 120 mm x 55 mm for use in restricted chassis.
- Includes high-quality, tested RJ45 cables and short 2U mounting clips for installation in 2U rack-mount servers.
- Intelligent hardware: Downloadable FPGA programming with multiple operating modes. Add new features related to voice and/or data when they become available.
- Autosense compatibility with 5V and 3.3V PCI busses.
- Line decoding: HDB3, AMI, B8ZS.
- Framing: CRC-4, Non CRC4, ESF, SF, D4T1/E1. Also compatible with Japan’s J1.
- A102E and A102DE PCI Express: 1 Lane PCI Express bus.
- Power: 800 mA peak, operational 300 mA max at +3.3 V or 5 V.
- Temperature range: 0 - 50 °C.
- 32-bit bus master DMA data exchanges across PCI interface at 132 Mbytes/sec for minimum host processor intervention.
- Ring buffer DMA handling for minimum host intervention and guaranteed data integrity on high volume systems.
- Supports Robbed Bit Channel Associated Signaling (CAS) and ISDN PRI.
- T1/E1 and fractional T1/E1, multiple channel HDLC per line for mixed data/TDM voice applications.
- Optimized per channel DMA streams and hardware-level HDLC handling unload the host CPU.
- T1/E1 and fractional T1/E1, multiple channel HDLC per line for mixed data/TDM voice applications.
- Optimized per channel DMA streams and hardware-level HDLC handling unload the host CPU.
- Uses raw bitstream interfaces to support arbitrary non-standard line protocols, such as non-byte aligned monosynch or bisynch.
- WANPIPE® routing stack is completely independent of TDMapplication for total system reliability. voice
- WANPIPE® supports certified, field-tested, and reliable Frame Relay, PPP, HDLC, and X.25.
|
|
|